NCR 74 OFX (7874) - Number System Character; Sensormatic Deactivation Tone Frequency; Sensormatic Deactivation Tone Pulse

Chapter 5: Programming 5-65
Number System Character
24040
Not Sent
0
Sent
UPC-A & UPC-E
Number System
1
Your Program
Not Sent
4
Sent
UPC-E
Number System
5
1 9
Number System
Character
UPC-A & UPC-E
Number System
Not Sent
6
Sent
UPC-A
Number System
7
UPC-E
Number
System
UPC-A
Number
System

Sensormatic Deactivation Tone Frequency
Tone
Frequency
(Hertz)
When entering Tone Frequency, the adjustment can be
incremented upward by scanning the
Hex B
tag. Each time
you scan the
Hex B
, the tone frequency increases one unit.
Scan the
End
tag or a valid Hex tag to end this mode. The eight
frequencies to choose from are 570 Hz (Default), 637 Hz,
721 Hz, 829 Hz, 976 Hz, 1186 Hz, 1512 Hz, and 2083 Hz.
B B
25913
Your Program
5 8 B

Sensormatic Deactivation Tone Pulse
The tone is a series of five pulses. The values of 1-8 generates 1 to 8
pulses of the frequency. The values 9-F generates 1 to 7 pulses of the
frequency modulated with a second tone. The eight frequencies are:
570 Hz(default), 637 Hz, 721 Hz, 829 Hz, 976 Hz, 1186 Hz, 1512 Hz,
and 2083 Hz.
X
Your Program
7
1-F
25912
B X
