NCR 74 OFX (7874) - GS1 Databar Tone Frequency; GS1 Databar Tone; GS1 Databar-E AI 93 to Code 39 Tag Data Conversion; GS1 Databar-E AI 94 to UCC-128 Tag Data Conversion

5-78 Chapter 5: Programming
GS1 DataBar Tone Frequency
25902
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 1, Save and Reset
702 Hz Programming Mode, Hex 7, Hex 4, Hex 1, Hex 0, Save and Reset
781 Hz
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 3, Save and Reset
868 Hz Programming Mode, Hex 7, Hex 4, Hex 1, Hex 2, Save and Reset
961 Hz
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 5, Save and Reset
1071 Hz Programming Mode, Hex 7, Hex 4, Hex 1, Hex 4, Save and Reset
1187 Hz
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 7, Save and Reset
570 Hz Programming Mode, Hex 7, Hex 4, Hex 1, Hex 6, Save and Reset
633 Hz
Setting
Default

GS1 DataBar Tone
24963
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 4, Hex 2, Hex 1, Save and Reset
Disable Programming Mode, Hex 7, Hex 4, Hex 2, Hex 0, Save and Reset
Enable
Setting
Default

GS1 DataBar–E AI 93 to Code 39 Tag Data Conversion
24955
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 0, Hex A, Hex 3, Save and Reset
Disable Programming Mode, Hex 7, Hex 0, Hex A, Hex 2, Save and Reset
Enable
Setting
Default

GS1 DataBar–E AI 94 to UCC–128 Tag Data Conversion
24956
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 0, Hex A, Hex 5, Save and Reset
Disable Programming Mode, Hex 7, Hex 0, Hex A, Hex 4, Save and Reset
Enable
Setting
Default

GS1 DataBar–E AI 94 to Code–128 Tag Data Conversion
24957
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 0, Hex A, Hex 7, Save and Reset
Disable Programming Mode, Hex 7, Hex 0, Hex A, Hex 6, Save and Reset
Enable
Setting
Default
