NCR 74 OFX (7874) - Page 90

3-48 Chapter 3: Installation
IfitisdesiredtoscanPDF417(2D)barcodeswiththeHand‐Held,youcanenablethe
RealScan74toallowthepass‐throughofthedatawithouttheRealScan74itself
havingthecapabilitytoreadthattypeofbarcode.
Thefollowingprogrammingsequenceisonlyfor
USB‐configuredHand‐Helds:
27023
Selection Programming Tag Sequence
Enable Programming Mode, Hex 7, Hex F, Hex 9, Save and Reset
Disable Programming Mode, Hex 7, Hex F, Hex 8, Save and Reset
Setting
Default
