NCR 7454 - Pentium Default BIOS Settings

4-8 Chapter 4: Operating System Recovery
Completing the OS Installation (Win95)
Thesystemautomaticallyrebootswhentheimagerecoveryiscomplete
andstartsthesoftwareinstallation.Thisinstallationalsoinstallsmost
oftheadditionalsoftwareanddriversthatareincludedinthedisk
image.Completetheinstallationasfollows.
1. Aftertheterminalreboots,pressNextattheWindowsSetupscreen.
2.
AttheUserInformationscreen,entertheUserinformation.This
canbedoneusingakeyboardoryoucanusethetouchscreen
keyboard.Afterenteringtheinformation,press
EnterortouchOK.
3. OpentheControlPanelandruntheMicroTouchscreencalibration.
Completing the OS Installation (DOS)
Thesystemautomaticallyrebootswhentheimagerecoveryiscomplete
andopensattheDOSC:prompt.