NCR 7454 - NCR 7454-3 Xxx Winxpe Operating System Recovery Software (Version 02.02.00.01)

Chapter 4: Operating System Recovery 4-13
NCR 7454-3xxx WinXPe Operating System Recovery Software
(Version 02.02.00.01)
(LPIN:D370‐0565‐0100)
Note: Thisproductshouldonlybeusedon7454terminalswitha
MicrosoftWindowsXPelicense.
7454‐3xxxWindowsXPeOperatingSystemRecoverySoftware
providesthemeansofrestoringtheoperatingsystemtotheharddisk
ofa7454POSterminal.Thebootstrapprogram(di_intel.bsd)anddisk
recoverybootimage (di_intel.bid)aredownloadedtothetarget
terminaloverthenetworkandrestoretheharddisktothepreinstalled
stateasshippedfromthefactory.Thisenablesinstallationofthe
followingsoftware:
• MicrosoftWindowsXPew/SP1
• SMILynxEM/EM+Videodriver(6.13.10.228)
• Intel82559Ethernet
LANdrivers(6.01.03.0000)
• NCRSYSMdriver(3.0.4.12)
• MicroTouchdrivers(5.64)
Thefollowingdriversarenotinstalledautomatically,butcanbe
installedfromtheirrespectivelocations(Readmefilesexistinthese
locations,aswell):
• BackpackCD‐ROM(4.0.100.1190) C:\Install\Drivers\CDRom
• EdgeportUSB(2.20) C:\Install\Drivers\USB
• InsideOutNetworks
Watchport/V
Camera(2.20)  C:\Install\Drivers\Camera