NCR 7454 - Installing a Serial Mouse

Chapter 2: Hardware Installation 2-35
Installing a Serial Mouse
FollowthesestepstoinstallaSerialMouseontheterminal.
1. Edittheboot.inifile,whichislocatedintherootoftheCdrive.
a. OpenWindowsNTExplorer
b. Gotothe
ViewmenuandselectFolder Options.
c. Selectthe
Viewtab.
d. Scrolldownuntilyouseeafolderthatislabeled
Hidden Files.
Makesurethebuttonlabeled
Show All Filesisselectedandthen
selectOK.
e. SelecttheCdriverootdirectory.Scrolldownuntilyoufindthe
filenamedboot.iniandselectit.
f. Openthe
FilemenuandthenselectProperties.
g. Unchecktheboxlabeled
Read OnlyandthenselectOK.
h. Opentheboot.inifilewithNotepad.Itshouldhavethe
followingentries:
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows
NT Workstation Version 4.00" /NoSerialMice
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows
NT Workstation Version 4.00 [VGA mode]" /basevideo
/sos
2. Deletethetext/NoSerialMice.Thefileshouldnowlooklike:
3. Savethefileandthenrestarttheterminalwiththeserialmouse
connected.