3-10 Chapter 3: Setup
Mode
This option is used to set the mode for serial port B.
1. Move the cursor to the Mode option.
2. Press Enter and then select the desired setting from the drop-down
menu.
Parallel Port
This option is used to configure the parallel port.
1. Move the cursor to the Parallel Port option.
2. Press Enter and then select the desired setting from the drop-down
menu.
• Disabled – no configuration
• Enabled – User configuration
• Auto – BIOS or OS chooses configuration
• OS Controlled - (displayed when controlled by OS)
Normal
IrDA
ASK-IR
Disabled
Enabled
Auto
To Next Page
Loading...
