Chapter 3: Setup 3-23
Fixed Disk
This option is used to enable/disable power management of the hard
disk during Standby and Suspend. To set this option, perform the
following steps:
1. Move the cursor to the Fixed Disk option.
2. Press Enter and then select the desired setting from the drop-down
menu.
Video
This option is used to enable/disable power management of the video
during Standby and Suspend. To set this option, perform the following
steps:
1. Move the cursor to the Video option.
2. Press Enter and then select the desired setting from the drop-down
menu.
IDE Drive/PCI Bus Monitoring
This option is used to enable/disable activity on the IDE device to keep
the system awake. To set this option, perform the following steps:
1. Move the cursor to the PCI Bus Monitoring option.
2. Press Enter and then select the desired setting from the drop-down
menu.
Disabled
Ena
To Next Page
Loading...
