B-14 Appendix B: Feature Kits
Set Parallel Port to Bi-directional Mode
It is recommended that you configure the terminal parallel port to Bi-
directional Mode. This will ensure error-free data transfer.
Note: This is the default BIOS setting and may not be necessary to set.
1. With the hardware connected as previously described, apply
power to the terminal.
2. When prompted, press <F2> to enter the BIOS Setup Utility.
3. Select the Advanced Menu.
4. Select the I/O Device Configuration.
5. Arrow down to the Parallel Port, Mode.
6. Use the space bar to select Bi-directional Mode.
7. Press <Esc> to exit the submenu.
Using the CD-ROM for OS Recovery and BIOS Update
The primary purpose for the External CD-ROM is for OS recovery and
BIOS update purposes. This software is distributed on bootable CD-
ROM media, which temporarily installs the drivers during boot. Refer
to the OS Recovery Procedures or BIOS Update Procedures chapters for
additional information.
To Next Page
Loading...
