Chapter 2: Hardware Installation
Installation Restrictions
• The NCR CX7 All-in-One POS (7772) conforms to all applicable legal requirements.
To view the compliance statements see the NCR RealPOS Terminals Safety and
Regulatory Statements (B005-0000-1589).
• Install the CX7 near an electrical outlet that is easily accessible. Use the power cord
as a power disconnect device.
• Do not permit any object to rest on the power cord. Do not locate the CX7 where
the power cord can be walked on.
• Use a grounding strap or touch a grounded metal object to discharge any static
electricity from your body before servicing the CX7 terminal.
Warning: This unit contains hazardous voltages and should only be serviced by
qualified service personnel.
Caution: Do not connect or disconnect the transaction printer while the terminal is on.
This can result in system or printer damage.
Ergonomic Workplace
The NCR CX7 All-in-One POS (7772) has a high–brightness LCD with an anti–glare
screen. For best results, please observe the following when considering the terminal
workplace:
• Avoid direct–glaring and reflective–glaring light. Locate the terminal in a controlled
luminance surrounding. When installed next to windows position the terminal so it
does not reflect the outside light.
• If possible, avoid reflective glaring caused by electric light sources.
• Position the terminal for ideal viewing angles.
To Next Page
Loading...
