Replacing Parts
Low-Speed Encoder
NCR iTRAN 180es/300es/600 Operator’s Guide 4-27
4 Use a piece of adhesive tape to remove dust and lint from the metering
roll. Apply the tape to the metering roll, rub it lightly with one finger,
then peel it off. Repeat until you have cleaned the entire metering roll.
5 Lift the feed spool with the empty cardboard core on it. Pull the core off
the spool, but keep the spool in your hand, and SET THE CORE ASIDE.
cardboard core
feed spool
C00628
To Next Page
Loading...