NCR iTRAN 180es - Enhanced Document Feeder; (Hopper); The Hopper; Taking Care of the Hopper

Introducing the Transport
Enhanced Document Feeder (Hopper)
1-10 NCR iTRAN 180es/300se/600 Operator’s Guide
Enhanced Document Feeder
(Hopper)
1
The Hopper
1
The hopper is located in the first module at the left end of your transport.
You use the hopper when you need to feed a stack of documents into the
transport automatically, rather than one at a time.
The hopper can hold more than 1200 documents. The large metal weight
presses the documents down so that they feed into the track.
Taking Care of the Hopper
1
For instructions on loading documents into the hopper, see Chapter Two. For
replacing parts see Chapter Four.