Handling Documents
Inserting and Removing Documents
2-10 NCR iTRAN 180es/300es/600 Operator’s Guide
Pockets
2
Each pocket in the pocket module holds 300 to 350 documents. When
pockets get filled, or when you have finished processing documents, you
must empty them.
1 Hold the pocket paddle back (open) with one hand.
2 Grasp the documents in the pocket with the other hand and pull them out
of the pocket.
3 Place the documents in a tray as required by your processes.
4 Allow the paddle to return to its normal position.
5 If your application requires it, press the restart button on the front of the
pocket module .
Caution: When removing documents from a pocket or putting documents back into
one, be careful not to push the mylar plastic strip out of place. If the strip is
out of place, the documents may not stack properly. If you do push the strip
out of place, push the stack of documents to your left for a moment, so that
the strip springs back into place. (Don’t push the documents all the way to
the left, or the machine will think the pocket is full.)
To Next Page
Loading...