NCR iTRAN 180es - Start-Of-Day Cleaning Procedure; Supplies Youll Need

To Next Page

To Previous Page

Cleaning the Transport

Start-of-Day Cleaning Procedure

NCR iTRAN 180es/300es/600 Operator’s Guide 3-5

Start-of-Day Cleaning Procedure

Every day before you start up the transport, you must perform these cleaning

tasks:

1 Vacuum the entire length of the transport.

2 Clean the glass parts (windows and lenses), the black and white reference

rods and the illuminators.

3 Clean the graphical endorser(s).

This section tells you how to do these jobs.

If you are not sure what equipment your transport has, ask your supervisor,

or see Chapter 1, “Introducing the Transport”.

Supplies You'll Need

For start-of-day cleaning, you need the special vacuum cleaner nozzle and

cleaning tube:

If your transport has an image-lift/reader module or a downstream ILM,

you'll need:

• some lens-cleaning tissue. You need the dry tissue for cleaning the lens

and the pre-moistened tissues to remove smudges and fingerprints.

• one of the special swabs provided for cleaning track windows

• one of the special swabs provided for cleaning illuminators

• a piece of thin cardboard to clean the track and the pocket drive rollers

If your transport has a graphical endorser, you will need:

• a cleaning cloth to clean the track at the graphical endorser(s)

• a cotton-tipped swab to clean the vacuum openings at the graphical

endorser(s)