NCR iTRAN 180es - High Performance Hopper; Replacing the Picker Belt

Replacing Parts
High Performance Hopper
NCR iTRAN 180es/300es/600 Operator’s Guide 4-3
High Performance Hopper
4
If the number of double-feeds or documents not fed increases, it may be time
to replace the hopper belts, advance tire and the feeder belt and feeder wiper.
Replacing the Picker Belt
4
This procedure should be done each time your transport has processed
1 000 000 documents.
1 Remove any documents from the Hopper (keep them in order).
2 Lift up on the Hopper front cover and remove.
3 Remove the Picker belt by pulling it off the rollers