NCR P1235 - Cable Management

NCR P1235 e*SmartClock Installation Guide, Ver. 1.1
US-IT Restaurant Architecture Team
Page 15 of 37 12/6/16
Step Step Description Pictures
8
Place
E
PSON
TM
-
L90P Printer into the
bracket
9
Route the USB cable through the Printer
bracket mount and connect the other end to
USB port on the e*SmartClock
NCR P1235 Panel
10
Power
on the Printer by pressing the power
switch that is located on the front side of the
Printer
Verify the following:
• Printer powers up, Power LED should turn
green
• Form feed works
Power ON/OFF Button
1
1
A finished product wit
h printer should look
like this
To be updated with NCR p1235 integrated
biometric reader installation image
7.4 Cable Management
Step Step Description Pictures
1
Perform cable management for the
following: