NCR P1235 - Appendix C - Additional Monitor Configuration Instruction (Optional)

NCR P1235 e*SmartClock Installation Guide, Ver. 1.1
US-IT Restaurant Architecture Team
Page 29 of 37 12/6/16
Appendix C – Additional Monitor Configuration Instruction (Optional)
1
After the second monitor is connected to
NCR
P1235 as mentioned in the Section 8; follow the
steps below to duplicate the NCR P1235 display
on the monitor.
o Start the NCR P1235 and wait until
e*SmartClock screen appear
o Power on the second monitor connected to
the NCR P1235
o Attach USB Keyboard to NCR P1235 USB
port
o Press “Ctrl+Alt+Delete” from keyboard
o Select “Start Task Manager” option from
keyboard OR Touch “Start Task Manager”
from screen as shown in the picture.
2
Touch “File” menu on
Windows Task Manager
OR press “Alt+f” from Keyboard to select “File”
menu from Windows task manager
3
Touch on “New Task (Run...) from
Windows task
manager’s ‘File’ menu OR Select “New Task
(Run…)” and press enter from keyboard
4
Type “Control” from keyboard and press “
Enter”
OR Touch “OK” Button on the NCR P1235 touch
screen