NCR PX10 POS 7746 - RJ12 Cash Drawer Port; Cash Drawer Cables

Controlled Deployment
Hardware Installation 2-29
RJ12 Cash Drawer Port
A single 6-position RJ12 connector is used supporting dual +12V or +24V cash drawer.
The color of the connector is red.
Pin Signal Name
1 Logic GND
2 Solenoid A
3 Drawer A/B Open/Close Status
4 +24V
5 Solenoid B
6 Power GND
Cash Drawer Cables
The terminal supports a 2-drawer configuration with a Dual Cash Drawer Cable.
Connect this cable to the terminal or transaction printer cash drawer connector.
Note: When connecting a single 12V legacy cash drawer, the 1432–C517–0009 cable is
required to be used.
Product ID Description Configuration Notes
1432-C516-0009
(24V)
24V cash drawer cable splitter Required when connecting dual
24V cash drawers
1432-C517-0009
(12V)
12V cash drawer cable splitter Required when connecting
single or dual 12V legacy cash
drawer(s)
24VCash Drawer Cable Splitter (1432-C516-0009)