NCR PX10 POS 7746 - SIM Card Reader

Controlled Deployment
2-30 Hardware Installation
RJ12 Pin Color Signal Name
Dual Cash
Drawer
1 Blue Frame GND 1
2 Yellow Kick-out Signal 2
3 Green Open/Close Status 3
4 Red +24V 4
5 Black Kick-out Signal 2 5
6 White SignalGND 6
12VCash Drawer Cable Splitter (1432-C517-0009)
RJ12 Pin Color Signal Name
Dual Cash
Drawer
1 Blue N/C 1
2 Yellow CD Kick-out SignalA 2
3 Green CD Open Con 3
4 Red N/C 4
5 Black CD Kick-out Signal B 5
6 White SignalGND 6
SIMCard Reader
The 7746 Motherboard provides one smart card reader for full size SIM using Microchip
SEC1110 Smart Card Bridge to USB. The Smart Card Bridge to USB is connected to the
one of the downstream port of the USB 2.0 Hub 4-Port internally. SIM slot is located at
the bottom side of the unit with a label and insert arrow “SIM”.