NCR RealPOS 40 - Character Sets

Chapter 1: Product Overview 1-35
 Cabinet
– UVStableMaterial
– AvailableinNCRLightGray(G‐11)andNCRCharcoalGray(CG1)
 Connectors
– 9pinDsub
– PoweredUSB
 Cables
– PoweredEIA‐232
– PoweredUSBCable
– UnpoweredEIA‐232CablewithY‐ConnectionforPowerBrick
– UnpoweredUSBCablewithY‐ConnectionforPowerBrick
– 1mand4mLengths
 PowerSupp
ly
– UniversalPowerSupply(12V,12Woutput)
– 8pinMolexConnector
 EIA‐232orUSB2.0I/Fsupport
– Thecomponentsforbothinterfacesarepopulatedonasingleprintedcircuit
board.Bothinterfacesareactive,tho
ughonlyoneinterfacecanbephysically
connectedatatime.Thedisplaycommunicatesviatheinterfaceconnectedto
it.
 MountingOptions
– TableMount,4‐in.Post
– TableMount,8‐in.Post
– TableMount,12‐in.Post
– TableMount,16‐in.Post
– IntegratedMountforNCR7456,7
457,7458
Character Sets
 Supportfor19charactersets
 3Charactersetsinbaseunit
– CodePage858(International)
– Katakana
– CodePage866(Cyrillic)
 32KBFlashMemoryforsupportofupto16additionalcharactersets