NCR RealPOS 40 - Page 92

5-4 Chapter 5: BIOS Updating Procedures
Option1–UpdateBIOS–NopromptforSerial/Model/Classunlessinvalid
ThisoptionautomaticallyupdatestheBIOS.
1. HighlightOption1andpress[ENTER].
2. TheFlashProgramupdatestheBIOSandautomaticallyrebootstheterminal.
Option2–UpdateDMIonly‐Serial/Model/ClassupdateONLY(noBIOSorSPI
Update)
Thisoptionletsyouent
ertheDMIinformationonly.TheSPIandBIOSarenot
updated.
1. HighlightOption2andpress[ENTER].
2. Atthepromptpress[ENTER]toentertheClass/Model/SerialNumber
information(DMI).Followtheonscreenformatinstructions.
Example:
7610-1000-8801[ENTER]
54-19378230[ENTER]
3. Press1toconfirmthedataandtocontinue.
4. RemovetheBIOSUpdatemediabeforethesystemboots.
5. Systemisreadyforoperation.