NCR RealPOS 5953 - Multi-Color Power LED Indicators

1-4 Chapter 1: Overview
Multi-Color Power LED
OnthefaceoftheUSBDynaKeyisamulti‐colorpowerLED.The
statusandconditionindicatedbytheLEDareshownasfollows.
Status Condition
Green DynaKeypoweron
Orange* LCDinstandbymode(orseenotebelow)
Red FPGAreportinganerrorcondition
Flashing
(red/green)
DynaKeykeypadinPCSetupmode
(SeeSpecialKeypadmodeinInstallation)
Off DynaKeypoweredoff
Note: TheLEDmayalsobeorangeforafewsecondsonpower‐up
beforedisplayisactive.