7-18 Chapter 7: Software Utility
2. Select 5976 CodePage Flasher from the ROM Flasher window. The application
displays the 5976 Utility window.
Note: The following window displays the code pages for a USB interface
connection. To display the existing code pages for the RS–232C connection, select
RS–232C from the Interface field. Select Refresh.
3. To load an input file into the Code Page utility, select Browse beside the Input File
field of the Code Page Generator section.
4. Locate the input file (
*.dat file) used to generate the code page.
5. To specify a filename and destination for the output text file, select Browse beside
the Output File field.
Note: If you do not specify the filename and destination of the output file, the
application assigns the name
out.txt as the filename and the default directory as
the destination. The default directory is the location of the installed Rom Flasher
software which is
C:\Program Files\RomFlasher 5976.
To Next Page
Loading...
