6 NCR RealPOS 60 Terminal Site Preparation
Handling Components
One person may move terminal system components. However, consider the following
when moving the terminal or handling individual components.
• Peripherals do not attach to the base unit and may slide off if the base unit is tipped.
• The keyboard does not attach to the drawer unit and may slide off if the drawer unit
is tipped.
• Do not turn the operator or customer displays upside down while holding only the
display-mounting stand. The display is not attached to the stand and may slip out
and be damaged if turned upside down.
Cabinet Security
The 7601 has easy access to the internal components. However, the case can be secured
using a Kensington lock or a padlock on a tab located on the rear of the unit.
To Next Page
Loading...
