NCR RealPOS 60 - Running the Terminal Diagnostics

To Next Page

To Previous Page

6 Diagnostics

3. ConnectaUSBkeyboardtotheterminal.

4. ApplypowertotheCD‐ROMdrive(switchontheback).

5. InsertthediagnosticCD.

6. Applypowertotheterminal.

7. Press[F8]duringboot(whenyouseetheNCRlogo)toentertheBootSelectmenu.

8. IfyouareusingtheintegratedCD/DVDDriveselect

CD/DVD:P1-DV-28S-V.

IfyouareusingtheexternalUSBCDDriveselectUSB:TEAC CD-W552E.

Running the Terminal Diagnostics

InserttheE‐BoxTestsCDintheCD‐ROMdriveandbootthesystem.Whenthesystem

isbootstheMainMenuisdisplayed.

###################################################

NCR Loadable E-Box Diagnostics (CD Version)

Linux Base: NSPOS9

###################################################

NCR Loadable Diagnostics

1) Perform Terminal Diagnostics

2) View Loadable Diagnostic Documentation on CD

3) Exit and Reboot

Select:

SelectPerform Terminal Diagnostics (1)andpress[Enter].Theavailableterminal

testsaredisplayed.

NCR Linux Loadable Terminal Diagnostics

1) Ethernet

2) Floppy Disk Drive

3) Storage/IDE/SATA Drives

4) Serial Ports

5) System Information (CPU, DMI, etcs.)

6) System Memory

7) USB Ports

E) External Tests (Floppy only)

0) Exit Terminal Diagnostics

Select:

Other manuals for NCR RealPOS 60