NCR RealPOS 60 - Replacing the Memory Module

Hardware Disassembly 19
Replacing the Memory Module
1. Removepowerfromtheterminal.
2. OpentheTopCover.
3. Openthelatchesattheendsofthememorysockettoreleasethemodule.
4. Toinstallthemodule,alignitwiththesocketandpushitstraightdown,applying
downpressureontheendssmoothlywithbothhandsasindicatedbythearrows
below.(Notethattheconnectoriskeyed.)
28756
Memory Module Latches
28757