NCR RealPOS 70 - Connecting NCR 5964 Displays

8-8 Chapter 8: Installing Peripheral Options
Installing an NCR 5964 12.1-inch Touch LCD
TheNCR5964‐6xxxcanbeconnectedasaremotedevice.
Note: APCkeyboardisrequiredtoconfigurea596412.1‐inchTouch
LCD.
Thefollowingillustrationsshowthecableconnectionsforthe5964and
the7402.Therearetwocablesrequired.
• DVICable–providesthevideointerface
tothe5964
• RS‐232Y‐Cable–providesaserialinterfaceandpowertothe5964.
Italsoconnectsthe5964PS/2keyboardconnectortotheterminal,
whichprovidesaninterfaceforthewedgecontroller(MSR,PS/2
Keyboard,Scanner,andToneSpeaker).