NCR RealPOS 70 - Software Requirements for USB MSR

13-2 Chapter 13: Wedge to USB MSR Software Migration
Software Requirements
ThesoftwarethatsupportstheUSBMSRisavailableintheRetail
PlatformSoftwareforWindows(RPSW),version1.3.0(orlater).
SettingupthesoftwaretosupporttheUSBMSRrequirestwo
components.ThefirstistohavetheOPOSServiceObjectand
supportingDLLinstalledonthesystem,andthe
secondistohavethe
OPOSProfileconfiguredproperlytousethissoftware.
1. OPOSServiceObjectandSupportingDLL
• ServiceObject:NCRMSR.DLL
• Supportingfile:NCRHID_DLL.DLL
2. TheOPOSProfilemusthavethefollowingproperlyconfigured:
• ProgrammaticID:NCRFitClient.MSR
• MSRInterface:USB
RPSWversions1.5.2(and
above)installsthecorrectDLLsontothe
systemwhendefaultinstallationoptionsarechosen,buttheydonot
createadefaultprofilethatusestheMSR.RSPWversions1.5.2(and
later)doescreateadefaultprofile(NCRMSR.2)thatusesthe
NCRFitClient.MSR.However,theMSRInterfaceissettoIntegrated.

ChangingthistoUSBcreatesaprofilethatworkswiththe7402USB
MSR.
ForRPSWversionsbefore1.5.2theDLLsrequiredtousetheUSBMSR
arenotinstalledbydefaultconfigurationselections.Inordertouse
theseversionswiththeUSBMSRamodifiedinstallationmustbe
performed.
TheNCR5932ServiceObjectfeaturemustbeaddedwhen
performingtheinstallation.Adefaultprofile(NCRMSR.3)iscreated
andproperlyconfiguredduringinstallationtousetheUSBMSR.