NCR RealPOS 70 - Chapter 14: Maintenance; Cabinet and Touch Screen Cleaning Procedures

Chapter 14: Maintenance
Cabinet and Touch Screen Cleaning Procedures
1. Disconnecttheunitfromthepoweroutletbeforecleaning.
2. Useasoftclothdampenedlightlywithamildnon‐abrasivesoap&
watersolutionor70%IsopropylAlcohol.
3. Gentlywipethesubjectareaclean.
4. Wipethedampareasdry.Makesuretheglassandtouchscreen
edges
arecompletelydrybeforeusingtheunit.
5. Avoidgettinganyliquidsinsidetheunit.Ifliquiddoesgetinside,
haveaqualifiedservicetechniciancheckitbeforeyoupoweriton
again.
6. Remove(vacuum)extradustfromaroundthecoolingvents
(SeeCoolingVentCleaningsection).
Cleaners/Solvents to Use
Usethefollowingcleaner/solventstocleantheunit.
• MildNon‐AbrasiveSoapandWaterSolution
or
• 70%IsopropylAlcohol