NCR RealPOS 70 - Chapter 15: Operating System Recovery; OS Recovery Procedures

Chapter 15: Operating System Recovery
Introduction
ThischapterdiscussesproceduresonhowtorecovertheOperating
SystemfromCD‐ROM.IfyourunitdoesnothaveaninternalCD‐ROM
driveyoucanuseoneofthefollowing:
• TeacUSBExternalCD‐ROMDrive(2336‐K208)
• NCRServices:ExternalCDR/WDVD‐ROMDrive(603‐9014774)

• Network(SeetheNCRFitClientSoftwareUserʹsGuide,B005‐0000‐1235.)
Prerequisites
ThefollowingarerequiredinordertoperformanOSrecoveryfroma
CD.
• BootableCD‐ROMdrive(internalorexternal)
• Keyboard
OS Recovery Procedures
1. InserttheNCRPartitionImageApplicationCD(D370‐0605‐0100)into
theCDdrive.
2. Connectakeyboardtotheterminal.
3. Applypowertotheterminal.
4. Press[F8]duringboot(whenyouseetheNCRlogo)toenterthe
BootSelectmenu.