NCR RealPOS 70 - Page 282

15-2 Chapter 15: Operating System Recovery
5. IfyouareusingtheintegratedCD/DVDDriveselectCD/DVD:P1-
DV-28S-V.
IfyouareusingtheexternalNCRUSBCDDriveselectUSB:TEAC
CD-W552E.
6. Youshouldseeamessageduringboot,indicatingthattheCD‐
ROMhasbeenrecognized.
7. Press[DEL]duringboottoenterSetup.
8.
AttheSetupUtilitymenu,selectAdvanced BIOS Features.
9. SettheFirst Boot DevicetoUSB-CDROM.
10. Press[Esc]toreturntotheSetupUtilitymenu.
11. SelectSave and Exit Setup.
12. Asthesystemreboots,inserttheNCRPartitionImageApplication
CD(D370‐0605‐0100).Youshouldseeamessageduringboot,
indicating
thattheCD‐ROMhasbeenrecognized.
13. Atthemenu,enter1toselecttheimagerestorefunction.
####################################
NCR Partition Image Application
####################################
Select an option
1 – Process Image/Script CD
2 – View Partition Image Documentation
3 – Interactive Create/Restore Via Network/USB
4 - Exit and reboot
14. Attheprompt,inserttheCD(disk1ifOSoccupiesmorethanone
disk)whichcontainstheoperatingsystemimage.Press[Enter].
15. Attheprompttocontinue,press1(Yes)and[Enter]tocontinue.