NCR RealPOS 70 - Page 283

Chapter 15: Operating System Recovery 15-3
16. TheHDDonthe7404isconnectedtotheSecondaryIDE.
Select[3]tocontinue.
Choose a drive to restore
a. Primary IDE Master Is Not Valid
b. Primary IDE Slave Is Not Valid
c. Secondary IDE Master OS SIZE
Microsoft 40 GB
4) Secondary IDE Slave Is Not Valid
5) USB/SATA Storage A Is Not Valid
6) USB/SATA Storage B Is Not Valid
7) USB/SATA Storage C Is Not Valid
8) USB/SATA Storage D Is Not Valid
17. Press[A]atthefollowingprompttoaccepttheargumentsandto
begintherestoreprocess.
Confirm Pending Operation
Mode is: restore
2) Drive is: Secondary IDE Master
3) Directory path is: /Images/
4) Filename is: nnnnnaaa
5) Reboot after operation complete: yes
6) Resize last data partition if possible: no
A) Accept these arguments
V) View OS Documentation
Q) Quit and reboot