NCR RealPOS 70 - Cash Drawer Support; Msr

Chapter 1: Product Overview 1-17
ThemotherboardhashardwaresupportforvariablespeedCPUfan,
usingtheLM85monitor.Variablespeedfancanlowersystemnoise
levels,reducedustingress,andimprovefanlife.Fanspeedcontrolis
viaPWMsignalsgeneratedbytheLM85.
Cash Drawer Support
The7402Terminalcontrolsthecashdrawerthroughacashdrawer
Kickoutconnectoronthebackoftheterminal(RetailDaughterCard),
orthroughthecashdrawerKickoutconnectoronthetransaction
printer.Theterminalcanbeconfiguredwith0,1,or2cashdrawers.
Thefirstdrawerisattachedto
theterminalthroughacablewithanRJ‐
45connector.Aseconddrawercanbeconnectedusinga‘Y’cable.
Note: AsingleOpen/Closestatussignalissharedwithbothdrawers.
Therefore,itisnotpossibletodeterminewhichcashdrawerisopen.
MSR
21366
MSR

TheMSRinterfacesupportsamaximumof3tracksofmagneticstripe
informationforsupportofISOformatcards.