NCR RealPOS 70 - Page 78

3-16 Chapter 3: Touch Screen Calibration – Windows (MT 7.12)
7. AdialogboxasksifyouwanttoTest,Accept,orCancelthis
calibration.SelectTest.(Optionalatthistime)
25250
Calibration completed successfully.
Do you want to test the calibration?
Test
Accept
Cancel

8. Testthecalibrationonthedrawscreen.

• Touchrandomlocationsonthescreenandverifytheresults.
• Dragyourfingeracrossthescreenandcheckthattheline
followsyourmovements.
• Toucheachcornerandalongtheedgesofthescreen.Verifythat
youcanreachthefullimageareaofthescreen.
•
Recalibratethetouchscreenifyouarenotsatisfiedwiththe
tests.
9. PressESCordouble‐touchthescreentoexitthedrawscreen.