A-130 Printer Specifications
Physical and Operating Environment
Temperature and Humidity
Temperature Humidity
Operating 5 to 50°C (41 to 122°F) 5% to 90%
Storage –10 to 55°C (14 to 131°F) 10% to 90%
Transit –40 to 60°C(–40 to 140°F) 5% to 95%
Condensation Condensation may occur when the printer is moved
from cold to warm areas after shipment. The printer's
design permits operation after drying out and stabilizing
at room temperature.
Reliability
The numbers in the table refer to the Mean Cycle Between Failure (MCBF) for the items
indicated.
Note: Reliability statistics are based on averages exhibited under lab conditions and do
not constitute a warranty.
Component Reliability
Thermal Mechanism 60 Million Lines
Communications Card (RS232/USB) 43.45 Million Hours
Communications Card (LAN) 26.3 Million Hours
Main PCB 1.65 Million Hours
Knife 2 Million Cuts
Dimensions and Weight
Height
130.0 mm (5.12 in.)
Width
125.8 mm (4.95 in.)
Depth
163.0 mm (6.42 in.)
Weight
1.1 kg (2.42 lbs)
To Next Page
Loading...
