3-80 Service Level Troubleshooting
Hardware Options
Set USB Type
Set the USB type using the configuration menu. Select Hardware Options in the
Configuration Menu.
Caution: Be extremely careful in changing any of the printer settings to avoid
inadvertently changing other settings that might affect the performance of the printer.
Press the Paper Feed button for the USB type you want.
Set USB Speed
Set the USB speed using the configuration menu. Select Hardware Options in the
Configuration Menu.
Caution: Be extremely careful in changing any of the printer settings to avoid
inadvertently changing other settings that might affect the performance of the printer.
Press the Paper Feed button for the USB speed you want.
To Next Page
Loading...
