6-90 Configuring AMT
Function Definitions
System Status
Displays the Power state, IP address, GUID, Date, Time
Hardware Information
System
Displays the DMI for Type 0,1, and 2 (BIOS info - Class/model/serial).
If NCR tools are used to flash the BIOS the NCR BIOS version and MAC addresses
are displayed.
Processor
Displays the CPU information from DMI.
Memory
Displays the Memory information from DMI for each Bank when populated,
including the memory manufacturer.
Disk
Displays the Disk information for each populated disk.
Note: There is one entry for RAID, and one for each physical disk.
Battery
Displays the hardcoded form of the DMI, which is required for AMT support
Event Log
Displays the BIOS POST error log (from power on to OS boot only) with date/time.
This can be cleared.
To Next Page
Loading...
