Installing the Terminal 2-43
Connecting the External Cables
Most external cables connect to the I/O Panel and route under the terminal, which is
located behind the Front Base Cover. Others connect to the Backplane Board and are
routed out the Base Rear Cover. This section shows how to gain access to the connectors
and how to secure the cables.
VGA Extension Cable
The VGA Extension Cable (1432-C327-0006) can be used to extend the VGA port from
the Backplane Board to outside the cabinet (or to the area of the I/O Board connectors in
the front of the terminal). This is makes it convenient for users who move external
displays from system to system without having to remove any cabinet parts.
To Next Page
Loading...
