NCR RealPOS 72XRT POS - Page 95

Configuring AMT 6-83
4. Enable Intel AMT Support.
a. Press [Enter].
b. Select Enabled.
c. Press [Enter].
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced ChipsetBoot Security Save & Exit
AMT Support (Disabled)
AMT
Disabled
Enabled
AMT Parameters
___________________
→←: Select Screen
↑↓/Click: Select Item
Enter/Dbl Click:
Select
+-: Change Opt.
F1: General Help
F2: Previous Values
F9: Load Defaults
F10: Save and Exit
ESC/Right Click: Exit
5. Press F10 and [Enter] to Save and Exit.
6. During re-boot watch for the following message:
Press <CTRL-P> to enter Intel(R)ME Setup
7. This message occurs immediately after the NCR logo disappears. At that moment,
press Ctrl-P.