NCR RealPOS X Series - Page 55

NCR Software OSD Utility 4-45
Brightness
Provides tools for adjusting Display brightness settings.
Contrast
Provides tools for adjusting Display contrast settings.
Positioning
Provides tools for gradually moving the image on the Display to a specific region
(either left, right, up, or down).
Size
Provides tools for increasing or decreasing the height and width of the image on the
Display.
Phase
Provides tools for increasing or decreasing the phase shift of the sampling clock.
Clock
Provides tools for increasing or decreasing the video sampling clock frequency.
Colour
Provides tools for adjusting Display color settings.
Sharpness
Provides tools for increasing or decreasing the sharpness settings of the Display.
Restore
Provides the following functions:
• Auto Setup - sets horizontal position, vertical position, clock and phase.
• Auto Color - sets red/green/blue gain.
• Factory Defaults - restores all factory defaults including brightness, contrast, and
color.
• Brightness/Contrast - restores factory defaults for brightness and contrast.
• Geometry Settings - restores factory defaults for geometry settings such as
horizontal position and vertical position.
• Colour Settings - restores factory defaults for colour settings.
Degauss
Provides tools for CRT display to perform a degauss cycle.
Moire
Provides tools for increasing or decreasing the vertical or horizontal moiré picture
cancellation.