NCR Realscan 7837 - Data Formatter Selections

12 - 8
Trigger Mode
Manual/Serial Trigger TRGMOD0
Automatic Trigger TRGMOD1
Manual Trigger, Low Power TRGMOD2
Presentation Mode TRGMOD3
Trigger Time Out
Serial Trigger Time Out TRGSTO####
Low Power Time Out TRGLPT###
Prefix/Suffix Selections
Add CR Suffix to All Symbologies VSUFCR
Prefix
Add Prefix PREBK2
Clear One Prefix PRECL2
Clear All Prefixes PRECA2
Suffix
Add Suffix SUFBK2
Clear One Suffix SUFCL2
Clear All Suffixes SUFCA2
Function Code Transmit
*Enable RMVFNC0
Disable RMVFNC1
Intercharacter Delay DLYCHR##
User Specified Intercharacter
Delay
Delay Length DLYCRX##
Character to Trigger Delay DLY_XX##
Interfunction Delay DLYFNC##
Intermessage Delay DLYMSG##
Data Formatter Selections
Data Format Editor
*Default Data Format
(None)
DFMDF3
Enter Format DFMBK3
Clear One Format DFMCL3
Clear All Formats DFMCA3
Data Formatter
Off DFM_EN0
*On, but Not Required DFM_EN1
On, Required DFM_EN2
Alternate Data Formats
1 VSAF_1
2 VSAF_2
3 VSAF_3
Selection
Setting
* Indicates default setting
Serial Command
# Indicates a numeric entry