3 - 2
Beeper Tone
Default = Normal.
Scan Voting
This sets the number of times the same bar code has to be read before it is
transmitted to the terminal. Normal uses the default values listed for the sym-
bologies in the Default Charts beginning on page 11-1. High doubles the votes
used below the threshold.
Default = Voting Normal.
Reduce Quiet Zone
Reducing the quiet zone requirements below AIM guidelines makes it possible
to read off-spec bar codes. This feature is effective with all symbologies.
Default = Don’t Reduce Quite Zone.
* Normal Beep
Short Beep
* Voting Normal
Voting High
* Don’t Reduce Quiet Zone
Reduce Quiet Zone
To Next Page
Loading...
