NCR VOYIX CX7 - CX Head (Motherboard) Connector Pinouts; USB-C (USB Type C Display)

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
57
CXHead (Motherboard) Connector Pinouts
USB-C (USB Type C Display)
The USB Type C connector (Molex 105450-0101-SD) serves as the connection between the
Motherboard and the secondary display. The connector is rated at 30V withstand voltage
and a current carrying capacity of up to 5A. The connector is compliant with the USB Type
C Standard with Alt Mode for Display Port and reversible connection capability.
Signal Pin Pin Signal
GND A1 B12 GND
USB3.0 TX1+ A2 B11 USB3.0 RX1+
USB3.0 TX1– A3 B10 USB3.0 RX1–
+V (12V) A4 B9 +V (12V)
CC1 A5 B8 SBU2
USB2.0 D+ A6 B7 USB2.0D–
USB2.0 D– A7 B6 USB2.0D+
SBU1 A8 B5 CC2
+V (12V) A9 B4 +V (12V)
Display Port A10 B3 Display Port
Display Port A11 B2 Display Port
GND A12 B1 GND
The Power Deliver (PD) Controller communicates with existing products which use TI
TPS6598x devices. TThe port only supports standard 5V and non-PD (non-Power Delivery)
standard voltage of 12V on +V pins to power NCR Customer Displays.
The port requires an MUX with Redriver to support cable lengths up to 4m.