NCR VOYIX CX7 - Serial (Standard UART)

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
82
DB-9 Serial (Standard UART)
The USBCentric I/O Board provides one full RS-232 serial port (Standard UART) through
a DB-9 connector. The port has a shunt to select between +12V (default), +5V, or normal
RI functionality. Maximum power capability is 1A from this port. The power output from
this port is protected by a self-healing fuse.
Pin Signal Name
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI