NCR XL10W Series - Page 45

Installation Restrictions 2-37
ExternalPower Cables
An ExternalPower Cable provides both USBand power to the display when the host
terminal does not have a USB12V port available, but does have an available standard
USB port.
1. Connect the External Power Cable to the display Power connector.
2. Connect the other end of the ExternalPower Cable to the USBconnector on the host
terminal.
3. Connect the Power Adapter DCCable to the External Power Cable (middle of cable).
4. Connect the ACPower Cord to the Power Adapter and an ACoutlet.