22
RH068 states of external handwheel switches (selection of axis and resolution).
[RH068] [xxxxx|xxxx|xxxx|xxxx]
axis 1
axis 2
axis 3
axis 4
axis 5
NC setting (handwheel off)
x0.001 resolution
x0.01 resolution
x0.1 resolution
RH090 spindle speed with the override and the range limits taken into account.
4.4 User's Registers and Flags
This category includes 100 registers that can be addressed by words as well as by bits. The
registers will preserve their contents even when the control is turned off, but they are not
covered by the internal checksum controls.
Addressed by word: F00-F99
Addressed by bits: F000-F997.
To Next Page
Loading...