Need help?Do you have a question about the Ncyclebike NC-60 and is the answer not in the manual?
General| Brand | Ncyclebike |
|---|---|
| Model | NC-60 |
| Category | Bicycle Accessories |
| Language | English |
Identifies the specific display model and its name.
Details technical parameters like voltage, current, screen size, and operating conditions.
Lists the core capabilities and features of the NC-60 display.
Provides dimensional drawings and physical characteristics of the display unit.
Guides on physically installing the display unit onto the bicycle handlebar.
Details the wiring and connector pinouts for connecting the display to the controller.
Describes additional functionalities, such as front light connections.
Explains the various elements displayed on the screen interface.
Details the visual layout and options available within the display's setting menu.
Describes the function of each button on the display's control panel.
Instructions for powering the display unit on and off.
How to adjust and select different levels of motor assistance.
Method for cycling through different data displays on the screen.
How to control the front light of the e-bike through the display.
Guides on activating and using the low-speed walk assist function.
How to change the speed unit between kilometers per hour and miles per hour.
Adjusting the screen's backlight intensity for better visibility.
Setting the inactivity period before the display automatically turns off.
Configuring the automatic activation of the front light.
Customizing how battery status is displayed (voltage, percentage, or off).
Setting the correct wheel diameter for accurate speed and distance readings.
Selecting the operating voltage for the e-bike system.
Configuring the voltage threshold for low battery protection.
Setting up a password to access the display settings.
Accessing and configuring advanced system parameters.
Setting the maximum allowable speed for the e-bike.
Adjusting the maximum current output from the motor controller.
Enabling or disabling the automatic cruise control function.
Choosing between different modes for the number of assist levels available.
Setting the signal voltage level for the torque sensor.
Configuring the number of magnetic poles for accurate speed measurement.
Selecting how the motor engages when starting (throttle demand vs. pedal).
Choosing between pedal assist only, throttle only, or both.
Specifying the type of Pedal Assist Sensor (PAS) by magnetic steel count.
Adjusting how sensitive the motor is to pedaling input to start.
Setting the initial power output level when the motor engages.
Restoring the display settings to their original factory defaults.
Accessing stored data like speed records, distance records, and serial numbers.
Outlines the duration and conditions of the product's limited warranty.
Lists conditions and damages that are not covered by the product warranty.
To Next Page