79
STEP 19:When Ring Tone is selected at STEP 18,
the following Ring Tone screen is displayed.
Select either Download1, Download2
or Download3.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press - key.
STEP 20:The default file name will be displayed.
- When downloading a file for Music on Hold, the
default file name is “MOH.wav”.
- When downloading a file for ringer tone, the
default file name is “Melody1/2/3/.wav”.
- When downloading a file for Directory, the default
file name is “Directory.csv”.
Note:
DT710 can select 1 Hold Music only.