User Guide
105
www.nec-computers.com
Physical Drives Properties
Follow the procedure below to check the Physical Drive Properties. The example
shown below is an example to check the properties of the physical drive 0:0:0.
1. Click on the Physical Drive you want to check.
2. Click the checkbox for [Properties].
3. Click [Go].
Figure 47: Physical Drives Properties Screen (1)
The Properties screen shown below appears.
Figure 48: Physical Drives Properties Screen (2)
Configuration Wizard
Use this wizard to configure a RAID system using the connected HDDs. The detailed
explanation of this feature is given in "Configuring Virtual Disk".
Adapter Selection
Click [Adapter Selection] on the WebBIOS top menu to open the [Adapter Selection]
screen.
To Next Page
Loading...