User Guide
155
www.nec-computers.com
Installation Order
DIMMs must be populated in pairs and in the following order:
Group #1, #2, #3, #4, #5 and #6.
Figure 106: Locating the DIMM Sockets
Caution
■ Install matched pairs of DIMMs equal in speed and size.
■ Refer to “Using the Memory RAS Features” on page 161 to
configure the memory mirrorins and online sare memory fea-
tures.
Installation
Install a DIMM as described in the following procedure.
Caution
The server supports only low-profile DIMMs (30 mm (1.2
inches) in height). It does not support DIMMs exceeding the
specified height.
Order
Group Sockets N°
1
1 #11 and #21
2
2 #31 and #41
3
3 #12 and #22
4
4 #32 and #42
5
5 #13 and #23
6
6 #33 and #43
DIMM #41
DIMM #42
DIMM #43
DIMM #11
DIMM #12
DIMM #13
DIMM #21
DIMM #22
DIMM #23
DIMM #31
DIMM #32
DIMM #33
To Next Page
Loading...